R-103 Standard RTD with Head and Tip Assembly

Tempsens Make RTD with Head and Tip Assembly:- 
Element: Pt100x1, Type: Simplex, 3 Wire
Head: Die-Cast Alu IP-67 (Single Entry)
Calibration Standard: Din-43760
Insulation: Mineral Insulated
Sheath Material SS316

In stock
As low as $17.04


Mineral Insulated Resistance Thermometers are made with Platinum-measuring resistors Pt100Ω. The inner Copper conductor is embedded in a closely compacted, inert mineral powder and is connected to the measuring resistor. This whole system is surrounded by the metal sheath to form a hermetically sealed assembly. It is with Standard Size Aluminum protection head. Class A/B accuracy conforming to IEC 60751. Extreme temperature range: -200 to 600°C Also Available in PT1000 element. Standard thread sizes are available for Mounting this RTD. To protect the RTD Element special Tip will be provided on RTD hot end to avoid damaged/opening the element.


Element Pt-100x1, Type:Simplex, 3 Wire
Mineral Insulated
Sheath Material  SS316
Sheath Outer Diameter 3mm
Sheath Length 250mm
Adjustable Compression Fitting 1/2” NPT
Tip Dia 4.5mm
Tip Length 50mm
Calibration Standard Din-43760

Key Features

  • Element: Pt100x1,Pt100x2
  • Sheath Material: SS316
  • Junction Style: 2Wire, 3Wire, 4Wire
  • Termination Styles: Various head designs in different ingress protection.
  • Available in3,4.5, 6, 8 mm sheath diameter


Calibration Standard:Din-43760


Write Your Own Review
You're reviewing:R-103 Standard RTD with Head and Tip Assembly