Floor Heating Cables

Shop Now

Nothing matches to radiant floor heating. It is more comfortable than any other type of heating system. Radiant floor heating is the most energy-efficient way of delivering heat. There is no other floor heating option that compares in terms of comfort. Radiant floor heating is a low-temperature technology that may be regulated individually in each area. Because it warms the people and item directly rather than heating air. In most circumstances, radiant floor heating cables may save 20 to 40% of energy compared to other forms of heating customizable for maximum comfort and efficiency. The thermostat is regulated to provide optimal eomic functioning of the floor heating cable, not the W/m of the heating cable, which determines energy usage.

The following are some of the benefits of heating cables:

  • Free of Ageing : The conductor element is protected from thermal ageing by various high grade insulation. Once installed, the floor heating cable has a life span equal to that of the building.
  • Maintenance Free : Electrical floor heating cables require minimal maintenance since they do not have any moving parts, unlike hydronic cables, which include valves and other components that require periodic maintenance, tubes in a hydronic system can also get clogged as a result of pollution and must be replaced on a regular basis. Very thin : The diameter of the cable is less than that of cables with different insulations, such as PVC. It simplifies the laying process. The rise in floor level during installation is minimized as a result of this aspect.
  • Moisture Resistant : Shielded & insulated floor heating cables are specifically developed for use in areas where moisture is a problem too, such as bathrooms.

Advantages of Marathon Heating Cables

  • Easy installation and can be installed in any area in the house and any type of flooring.
  • Can be an excellent option for low-energy homes.
  • Works quietly from beneath the tiles/plywood.
  • Underfloor heating distributes heat where it is needed, resulting in maximum heat efficiency and only very little heat loss.
  • Easy to control required temperature in all weather by digital temperature controller with thermostat.
  • For optimal protection, Marathon floor heating cables are insulated using XPLE/ETFE/FEP/PTFE on both the conductors and PVC (HR-FR) on the outer jacket.
  • Tempsens floor heating cables have been developed particularly to deliver primary heating beneath a variety of flooring. To facilitate 'tape-down' installation, the cables are also available into the preassembled fiber glass mats.
  • Tempsens floor heating cables are completely grounded and comes with a 3.5 meter long cold lead wire for power connection.

Download Datasheet


Shielding Coverage

100% Coverage

Bending Radius

5 times of cable thickness


Heat Resistant and Flame Retardant Jacketing

Flexibility of Cable

Excellent Flexibility for easy installation

Long Cold Lead

3.5 meter cold tail (Can be customized as per requirement)


Higher degrees of comfort can be achieved by using heating cables with close and consistent spacing, as well as thermostat to determine temperature needs.


Standard heat loads are available in 100 watt to 3300 watt. As part of the offered product range, several sizes for various types / sizes of flooring are also available.


In addition to this broad range, cables can be customized to meet specific length requirements, as well as heat loads and voltage needs.


  • Remove any trash and sharp protrusions from the subfloor.
  • Prior to installation, consider deflection and structural factors.
  • Before installing the cable, check its applicability according to the instructions.
  • Prior to putting floor coverings, consider using a scratch coat or a thin leveler.
  • Install Heat Resistant Insulation Sheet if want to reduce heat loss (Optional).
  • Install Marathon Floor Heating Cable on Plastic Molded Spacer or Aluminium Mounting Tape or similar spacer according to the manufacturer's installation directions.
  • Set up a digital temperature controller with thermostat for sensing the floor.
  • Install the floor covering according to the manufacturer's directions.

Maintenance & Warranty

Marathon floor heating cable requires no maintenance for the remainder of its warrantied life when installed
according to the installation instructions and adequate testing has been completed throughout.
Marathon warranty protects the Marathon heating cable for a period of 30 years against manufacturer's faults.

Floor Heating Cables Models


Floor Heating Cable (FHC-SX-06)

0.076mm2 /0.30mm2 CuNi/SS-Single Core,XLPE insulation, Multi-strand Earth Wire, Power output 06 Watt / Meter


Floor Heating Cable (FHC-SX-10)

0.028mm2 /0.40mm2 CuNi/SS- Single Core, XLPE insulation, TPC 1.0mm (Solid) Earth Wire, Power output 06 Watt / Meter,


Floor Heating Cable (FHC-SP-12.5)

0.013mm2 /0.36mm2 CuNi/SS/Kanthal/Cu- Single Core, PTFE Insulation, TPC 1.0mm - 1.20mm (Solid) Earth Wire, Power Output 12.5 Watt / Meter


Floor Heating Cable (FHC-DF-15.7)

0.050mm2 /0.13mm2 CuNi- Two Core, FEP Insulation, TPC 0.50mm² (Multi-strand) Earth Wire, Power Output 15.7 Watt / Meter


Floor Heating Cable (FHC-SP-15.7)

0.013mm2 /0.36mm2 CuNi/SS/Kanthal/Cu- Single Core, PTFE Insulation, TPC 1.0mm- 1.25mm (Multi-strand) Earth Wire, Power Output 15.7 Watt / Meter


Floor Heating Cable FHC-SX-17)

0.11mm2 /0.34mm2 CuNi/SS- Single Core, XLPE Insulation, TPC 0.75mm² (Solid) Earth Wire, Power Output 17 Watt / Meter


Floor Heating Cable (FHC-DE-120V-03)

0.07mm2 /0.35mm2 CuNi - Two Core, ETFE Insulation, TPC 1.00mm² (Multi-strand) Earth Wire, Power Output 03 Watt / Foot


Floor Heating Cable (FHC-DE-240V-03)

0.125mm2 /0.54mm2 CuNi/Cu/SS/kanthal- Two Core Solid, ETFE Insulation, TPC 1.0mm² (Multi-strand) Earth Wire, Power Output 03 Watt / Foot