English 
Bahasa Indonesia 
Polski 
Deutsch 
한국어 
Español 
Fibreglass Hopper Heater
Part Code: FGHH
- Power Voltage- 50–3600 watt
- Voltage Range- 12,24,110,230 Volt
- Function- Maintain elevatedtemepratures above moisture and acid dew points
Hopper Surface Heating Systems keep temperatures over the dew points for moisture and acids. For ESP Hoppers, Bag House Hoppers, Material & Dust Collector Hoppers, and Fiberglass Cloth Hopper Heaters, we develop and manufacture these heaters.
It provides even heat transfer over the surface, preventing any hot spots or carbonization of the substance. It is simple to manage and has a consistent temperature. The elements loosely follow the vessel surface temperature and are made to operate in the black-heat area.
The electrical Fibreglass Hopper heating pad is made up of highly resistivity of wire heating components and are insulated by two braids of glass-fiber yarn/ PTFE/PFA/FEP these type of fluoropolymer. The element is once more sandwiched between two layers of tightly woven glass cloth and distributed out over the carrier at a consistent pitch.
The heating element is connected to power supply through fiberglass insulated and silicon rubber sheathed cable. Series /parallel type of circuit are used in heating element design.
Applications:
- Bag house Hoppers
- Material and Dust-Collector Hoppers
- Vessel / Drum heating
- Concrete Mold
- Storage Tanks Viscosity control and freeze protection
- Low Temperature Ovens
- Concrete Curing
Construction Data
| Resistance Wire Alloy | Alloy – Nichrome 80/ Alloy 875/ Alloy 815/ Nickel 200/ Alloy 30/ Alloy 15/ Alloy 10/ Alloy 5/ Alloy 27 / Alloy 50/Copper/ Stainless Steel/ Customize. |
| Power Range | 50 – 3600 watt |
| Voltage range | 12,24,110,230 Volt |
| Heating Material | Fiberglass Cloth (Sand witch) with woven cloth carrier |
| Max. Continuous Temperature | 105°C/125°C/150°C/200°C |
| Max. Temperature | Up to 300°C |
| Covering |
Fiberglass Cloth High Temperature |
| Insulation Type | Fluor polymer /Customized with Braided. |
| Cold Lead | Silicon Insulated 200°C |
| Cold Lead Connection Type | Crimp Type with Connector |
Technical Specifications :
| Product Name | Fibre Glass Hopper Heater |
| Functions | Maintain elevatedtemepratures above moisture and acid dew points |
| Features |
|
| and freeze productionTaMaterial |
FEP/PFA/ETFE/PTFE/XLPE/Silicon//Customize Insulated Wire |
| Resistance range at 20°C |
3500 ohm/m – 0.169 Ohm/m |
| Applied Voltage | 12, 24,110, 230V customize single Phase |
| Watt Density | Up to 65 watt/m |
| Temperature Range | Up to 300°C |
| Standard width | 50, 100, 150, 200 , 400 and 500 mm |
- One piece series circuit type heating element for easy installation and low watt density.
- Resistant to shock and vibration for uniform heating and long Life.
- Heater is sealed with rivets, rugged construction, high temperature resistant aluminum body for long life of heater resulting in lower element temperatures.
- Temperature monitoring & control accessories such as Thermostats, RTD, Thermocouple.
