시멘트 공장의 이러한 모든 공정은 매우 먼지가 많고 연기가 자욱하며 가시성도 좋지 않습니다. 이러한 이유로 단색 피로미터로는 온도를 측정하기가 매우 어렵습니다.
우리는 킬른 입구, 연소 구역 및 2차 공기의 온도를 측정하기 위해 비율 파이로미터 AST A450C 및 AST A450C+를 보유하고 있습니다. 비율 파이로미터는 흐릿함과 먼지로 인한 오류에 덜 민감합니다. 이 파이로미터는 시야에 95% 흐릿함이 있는 경우에도 정확한 온도 측정을 제공할 수 있습니다. 이는 높은 정확도로 일반적인 모니터링을 위한 효과적인 측정을 제공합니다.
두 파이로미터 모두 다양한 아날로그 및 디지털 출력 옵션으로 제공됩니다. 이를 통해 CCR에서 정확한 온도 측정을 통해 원격 모니터링 및 제어가 가능합니다.
AST A450C PL/TL
AST A450C+PL/TL
We are participating in the upcoming Industrial Expo 2025 – Gujarat’s leading industrial exhibition held on 12th November – 14th November 2025 at Dahej, Gujarat -INDIA We will be exhibiting – complete range of Thermal Engineering solutions. Temperature sensors Thermocouple RTD Pyrometer Cables Mineral Insulated cables Thermal Imager Industrial Heating Electric Heating Tubular heater Temperature […]
We are participating in the upcoming Cement Expo2025 – Leading expo showcasing concrete technology, machines, green cement, policy & opportunity held on 12th November – 13th November 2025 at New Delhi- INDIA We will be exhibiting – complete range of Thermal Engineering solutions. Temperature sensors Thermocouple RTD Pyrometer Cables Mineral Insulated cables Thermal Imager Industrial […]
We are participating in the upcoming– 6th International Exhibition & Conference for Wire & Cable Industry held on 4th November- 6th November 2025 at New Delhi- INDIA[/caption]We will be exhibiting – complete range of thermal and cable solutions. Thermocouple Alloy Extension Compensating Conductor Nickel Conductor Copper Nickel Alloy Thermocouple Conductor Visit us at – Hall […]
The Problem: Refractory Failure in Coke Production Coke oven doors operate in some of the most challenging circumstances encountered in metallurgical operations within steelmaking facilities. These doors, designed with refractory linings, are used to seal the carbonization chamber and maintain the necessary conditions for the conversion of coal to metallurgical coke. The problem is simple: […]
It’s obvious that plastic recycling has become an important element of modern manufacturing, and although it has always been considered to be an environmentally responsible act, the truth is many manufacturing industries are learning ways to use waste and reprocess material. Band heaters are necessary for ensuring a reliable melted state, processing efficiency, and producing […]
The Problem: Equipment failure and fire hazards caused by undetected overheating in mill equipment and material handling areas. Generally, in all processing industries and manufacturing plants, equipment failure due to overheating in mill areas is a very common and critical challenge. The mill basement zones are highly restricted during mill operations, making it impossible for […]
Busbars are critical in switchgear, substations, and power distribution units (PDUs) for reliable and efficient power distribution. They offer a...
자세히 보기 →
The World of Textile Temperature: Where IR Pyrometers Change the Game To any textile person, IR pyrometer or infrared pyrometer...
자세히 보기 →
제지 산업은 사무용지에서부터 다양한 기본 제품을 생산하기 때문에 현대 문명의 정점이라고 할 수 있습니다.
자세히 보기 →
