Bobbin Heaters

Tempsens offers Ceramic Bobbin Heaters are fabricated from high-temperature factory insulators in various diameters and lengths for any voltage or wattage within manufacturing limits. Bobbin heaters are made with sheathed and without sheathed material.

The sheath material ranges from nickel-plated mild steel, Inconel alloys, and stainless steel. Resistance wires are supported on refractory insulators and connected to a terminal block at one end. Thermowell can be provided for accurate temperature sensing or other controls can be provided as well. They are normally manufactured for horizontal mounting but may be specially designed and constructed for vertical installation.

Designed for any voltage or wattage within manufacturing limits. These Bobbin Heaters consist of elements, which are exposed partially in the air for better transmission of heat. Also, when it is inserted into a radiant/immersion tube, it offers a large heated area for the liquid or semi-solid to be heated.

Advantages

  • Suitable for low temperature up to 600°C furnace heating
  • A wide range of lengths, voltages, and power is available to meet customers’ specific requirement
  • Simple and low-cost installation
  • Ease of maintenance and repair
  • Versatile and non-polluting
  • Energy-efficient as 100% of the heat generated is within the solution

Application Areas

  • Water, chemicals, etc
  • Offer for semi-solid materials like wax, fats, oil, and bitumen
  • Suitable for indirect heating of gases and liquids, where it is inserted into a pocket or protection tube in the process tank, wherein, it can be repaired or replaced without draining the process tank
  • Temperature Range

    Up to 600°C

  • Heating element

    Ferritic alloys wire mara FeCrAl and non-ferritic wire NiCr 80-20, NiCr 70-30

  • Bobbin size

    Standard: 25,30,36,42,45,57,93 other customize size available

  • Watt density

    1 to 10 W/cm2

  • Power

    Up to 12kW

  • Heater Parameters

    Customized – power rating, voltage, resistance, length, diameter, and other dimensions

  • Radiant Tube/Immersion Tube

    Stainless Steel SS Grade, Incoloy, Cast Alloys

  • Thickness of Tube

    1.5 to 3mm

  • Length of Tube

    300 to 2800mm customize

  • Terminal Box

    MS, IP54 standard, IP66 waterproof terminal box

  • Control

    Thermocouple, RTD, Thermostat for temperature control

Construction

Bobbin Construction1. Refractory Ceramic Blocks assembled together to the required length.

2. The Nichrome Resistance Wire heating element is inserted into the ceramic blocks for maximum life, evenly wound for even heat distribution.

View as Grid List

1 Item

Set Descending Direction
per page