Cartridge heater, Swaged in Leads, Inconel 800 sheath, Teflon lead wire, Epoxy Seal, 20mm x 100mm, 780W, 220VAC

  • Swaged in Leads construction
  • Ideal for application where there is excessive movement or leads are required to bend sharply upon exiting the heater
  • Sheath material- Inconel 800
  • Lead wire- Teflon insulated wire
  • End sealing material- Epoxy Seal
  • Power rating- 780W
  • Power supply- 220VAC
  • Diameter- 20mm, Length- 100mm
  • Maximum watt density- 300W/inch²
  • Standard termination- 10" lead wire
  • Customizable power rating, watt density, dimensions and other heater parameters to meet process requirements
In stock
SKU
HRI-S-20x100-Inconel-800-TFLW-EXYS

Part Code: HRI-S-20x100-Inconel-800-TFLW-EXYS

$10.26

Details

Hot Rod Cartridge Heaters are designed to provide uniform heating and excellent heat transfer rate throughout the heating surface. Facilitated with individually controllable heating zones, various process requirements such as zone specific heating and distributed wattage requirement can be achieved with precise and uniform temperatures. Heaters are constructed with minimal spacing between sheath and heating element to maintain lower internal temperatures which results in smaller sized heaters operating at higher watt densities.
Constructed of high grade Nickel Chromium resistance wire wounded on specially designed cores, separated from metal sheath using high purity magnesium oxide fill, all centered and tightly compacted in SS/Inconel tubing through refined swaging process, results in heaters with minimal air gap, high resistance to corrosion and oxidation, and increased life which makes Marathon make cartridge heater best in class with high performance and longer durability.

Specifications

Sheath Material Inconel 800
Temperature Range Up to 760°C
Nominal Diameter 20mm
Length 100mm
Watt Densities Up to 300W/in2
Power Rating 780W
Supply Voltage 220VAC
Sheath Length Tolerance ±3%
Wattage Tolerance +5%, -10%
Resistance Tolerance +10%, -5%
Lead Termination Swaged in Leads construction
Lead Wire Teflon lead wire
Lead Length 10"
End Seal Epoxy Seal

Key Features

  • Uniform heating and excellent heat transfer rate through the heating surface
  • Individually controllable heating zones
  • Small sized heaters with higher watt densities
  • High Temperature Lead Wires for temperatures up to 550°C
  • High Impact Ceramic Cap retards contamination and is suitable for high vibration applications
  • Nickel Chromium Resistance wire for maximum life, evenly wound for even heat distribution
  • Stainless steel sheath / Inconel sheath for oxidation and corrosion resistance in wide variety of environment
  • Optional inbuilt temperature sensors for precise temperature controlling

Standards

  • UL
  • CSA
  • RoHS

Reviews

Write Your Own Review
You're reviewing:Cartridge heater, Swaged in Leads, Inconel 800 sheath, Teflon lead wire, Epoxy Seal, 20mm x 100mm, 780W, 220VAC