- Home
- About
- Products
- Contact Temperature Sensors
- Cables & Wires
- Mineral Insulated Cables
- Nickel & Thermocouple Alloy
- Industrial Heaters
- Heating Cables and Mats
- Non Contact Temperature Sensors
- Industrial and R&D Furnaces
- Temperature Calibrators
-
Circulating Chiller
- Services
-
Special Products
- Thermal Profiling System
- Industries
- Resources
- Contact Us
- Shop
Search
Highly Accurate Digital Pyrometer with Extended Sensor Head
0°C to 800°C
- Spectral range 8 μm...14 μm
- Inbuilt LCD Display and Keypad for parameterisation
- Relay Output
Details
EL50-H is a digital Pyrometer in economic range with extended sensor head in 4 wire technology, for non-contact temperature measurement between 0°C to 800°C.The sensor head is unaffected by electromagnetic interferences. The pyrometer sensor head is specially designed to withstand ambient temperature up to 180°C without cooling.
The pyrometer is equipped with a Inbuilt 4 digit LCD display which offers many signal processing features. The electronic box with integrated Keypad helps in setting parameters like Emissivity,Analog Sub range,Set point,Hysteresis (Hyst),Analog Output,Unit of temp(°C or F),Response Time,Peak Picker and Sensor address etc. Analog outputs options available are 4…20mA, 0…20mA, 0…10V, Thermocouple type “K” or “J” (user selectable) via keypad or software. RS- 232/RS-485 serial interface card is available as optional.
EL50-H is provided with USB 2.0 output and PC software. The pyrometer can be powered through USB port. In this case no external power supply is required. 24 V DC is required for operation of Analog Output, RS - 232 & RS - 485 & Relay Output.
Specifications
| Temperature Range | 0° - 800°C |
| Spectral Range | 8…14 μm |
| Photodetector Type | Thermopile |
| Distance to spot size ratio | 2:1 15:1 |
| Emissivity (e) | 0.1….1.2 adjustable |
| Response Time | 60 msec adjustable up to 10 sec |
| Accuracy | ±1.5% of the measured value or 3°C whichever is greater (The sensor head must be at constant ambient temperature for a minimum of 15 minutes) |
| Repeatability | 0.3% of reading in °C + 1°C |
| Analog Output | 0-20mA, 4-20mA, 0-10V, Thermocouple Type “K” or “J” (User selectable) |
| Digital Output | USB 2.0 RS-232/RS-485 interface card *At a time only one digital output possible |
| Operating Temperature | Electronic Box up to 70°C and Sensor Head up to 180°C |
| Power Requirement | 12V to 28V DC with reverse polarity protection |
| Weight & Dimensions | 600g 112.5mm x 82.5mm x 33mm (L x W x H) |
Key Features
- Power supply (12V DC to 28 V DC) with reverse polarity protection
- The sensor head can withstand ambient temperature up to 180°C
- Spectral range 8 μm...14 μm
- Wide temperature ranges (0°C to 800°C)
- Inbuilt LCD Display and Keypad for parameterisation
- Fast response time within milliseconds
- Analogue output like 4…20mA, 0…20mA, 0…10V, Thermocouple type “K” or“J” (user selectable)
- USB2.0 Digital output and RS-232/RS-485 Serial interface card
- Relay output
- User-friendly PC software for communication
Accessories
- Pyrometer with LCD Display
- Keypad for parameterizing,
- Extended sensor head with 3m cable
- USB 2.0 Digital output, USB Cable
- Relay Output
- Analog output 4…20mA, 0…20mA, 0…10V, Thermocouple Type “K” or “J” (user selectable)
- Calibration certificate, Software & operation manual
Standards
- CE
Reviews
Write Your Own Review