English 
Bahasa Indonesia 
Polski 
Deutsch 
한국어 
Español 
ABOUT
Pure Nickel Conductor
Pure nickel alloys has wide characteristic that useful in the several fields. Nickel is highly resistance to various corrosion compared to other alloys. Also, high in electrical and thermal conductivity.
Annealed nickel has a low hardness, good tensile properties, and the malleability with this attributes make good weldablity and highly fabricated.
We produced different grades of pure nickel conductor as per the international standards.
| Elements | UNS NO2200 | UNS NO2201 | UNS NO2270 |
| Nickel | 99.0 %(Balanced) | 99.0 %(Balanced) | 99.9% |
| Copper | Max 0.25 % | Max 0.25 % | Max 0.01 % |
| Iron | Max 0.40 % | Max 0.40 % | Max 0.05 % |
| Manganese | Max 0.35% | Max 0.35% | Max 0.003% |
| Carbon | Max 0.15% | Max 0.02% | Max 0.02% |
| Silicon | Max 0.35% | Max 0.35% | Max 0.005% |
| Sulfur | Max 0.01% | Max 0.01% | Max 0.003% |
- Nickel 200 (UNS NO2200) is commercially pure nickel (99.6%) wrought nickel. It has good mechanical properties and excellent to many corrosive environments.Nickel 200 widely useful to the chemical industry, electronic parts, aerospace and defense industry and many more.
- Nickel 201 (UNS NO2201)has low base hardness and lower work hardening rate. Its suitable to multiple applications from spinning to cold forming . Nickel 201 is resistant to graphitization so it can used at temperature above 315°C.
- Nickel 270 (UNS NO2270) is high purity grade of nickel. It has a low base hardness and high ductility. Its extreme purity is useful for components of thyratrons, resistant thermometer and many more
All nickel grades conductors are highly malleable and soft.
Also, In the welding & brazing industry these grades are widely used. All nickel conductor grades has observed difference with thermal conductivity and Electrical Resistivity.
| Physical Constants | UNS NO2200 | UNS NO2201 | UNS NO2270 |
| Thermal Conductivity (20°C) | 70.3 W/m°C | 79.3 W/m°C | 86 W/m°C |
| Electrical Resistivity (20°C) | 9.6 µΩcm | 8.5 µΩcm | 7.5 µΩcm |
Key Properties
- High in Ductility and Malleability
- High Thermal Conductivity
- Excellent Electrical Conductivity
- Good on High-Temperature Stability
- Low Coefficient of Thermal Expansion
- High in Creep Resistance.
Applications
Electronic Industry
- High in Ductility and Malleability
- Heating elements for controlled heating.
- Resistors, capacitors, and inductors.
Chemical Processing:
- Heat exchangers, valves, and fittings.
- Heating elements for controlled heating.
- Electroplating and tank linings..
- Instrumentation and control systems.
- Gaskets, seals, filters, and strainers.
Welding Applications:
- Gas tungsten arc welding (GTAW/TIG), gas metal arc welding (GMAW/MIG), and shielded metal arc welding (SMAW) for various industries.
- Weld overlay for enhanced properties.
- Welding of reactors, vessels, heat exchangers, piping systems, aerospace components, electronic components, marine components, pressure vessels, and in seawater desalination.
Wire Mesh:
- Filtration in chemical processing, aerospace, and marine applications.
Available Form: Wire and Bar in acid wash and luster surface finish.
Diameter: 8.0 mm to 0.16mm
Quality check and Analysis – Each spool and Coils has been pass through all properties testing in Tempesens Instrument private limited, Udaipur – NABL accredited lab. Test certificates has been provided.
