Highly Accurate Non-contact Pyrometer With Analog Output and Digital Interface


Spectral range 8 μm...14 μm

Emissivity 0.1….1.2 adjustable

USB 2.0 Digital output, USB Cable

Fast Response time 60 ms

Out of stock

Part Code: AL30



AL30 Digital Infrared Pyrometers with Thermopile Sensors provides the advantage of noncontact temperature measurement of non-metallic surfaces, painted, coated or anodized metals etc.AL30 IR Pyrometer is designed for easy integration into 4 wire system .This format combines the high accuracy of digital signal processing with the simple connection . AL30 Infrared Pyrometer is used for target temperature ranging from 0°C to 1000°C. The electronic assembly is protected by IP 65 rugged stainless steel housing.

Al30 IR Thermometer is provided with USB 2.0 connector with cable. The Pyrometer can be powered through USB port. In this case no external power supply is required (24V DC requires for operation of analog output laser on Rs-232/RS-485 output).


Temperature Range 0°C….1000°C
Spectral Range 8 μm...14 μm
Photodetector Type Thermopile
Distance to spot size ratio 50:1
Emissivity (e) 0.1….1.2 adjustable
Response Time 60 msec adjustable up to 10 sec
Accuracy T < 200°C; ± 1.5% of measured value
T ≥ 200°C; ± 1% of measured value
(The instrument must be at constant ambient temperature for minimum 25-30 mins in power on condition)
Repeatability 0.3% of reading in °C + 1°C
Sighting Options
Laser Pilot Light (PL)
Analog Output 0-20mA, 4-20mA, 0-10V (User selectable)
Digital Output USB 2.0
RS-232/RS-485 (User selectable)
*At a time only one digital output possible
Operating Temperature 0°C…….70°C
0°C…..200°C (With water cooling jacket)
Power Requirement 24V DC
Weight & Dimensions 600g
Dia= Ø 49.5 mm; Length=118mm

Key Features

  • Highly Accurate due to digital linearization of the output 
  • Temperature range from 0°C....1000°C
  • Spectral range 8 μm...14 μm
  • Four wire form with Analog output 4...20mA or 0...20mA or 0...10V
  • Serial communication RS-232/RS-485
  • Fast response time of 60ms
  • Very good stability
  • Laser Targeting for precision targeting 
  • user friendly software


  • Pyrometer with Laser pilot light(PL)
  • Analog output 4...20mA, 0..20mA, 0..10V
  • USB 2.0 Digital output, USB Cable
  • Digital Interface RS-232 / RS-485(user selectable)
  • 1.5 mtr long connection cable with connector
  • 1.5 mtr. Communication cable 
  • Calibration certificate , software and operation manual






Write Your Own Review
You're reviewing:Highly Accurate Non-contact Pyrometer With Analog Output and Digital Interface