Highly Accurate on-line Infrared non-contact Pyrometer

75°C to 700°C

  • Spectral range 2 μm...2.6 μm
  • Emissivity: Laser Pilot Light
  • Laser Pilot Light
  • Fast response time within milliseconds
In stock

Part Code: A150



A150 is a specially designed highly accurate digital IR Pyrometer operating at the near end of the infrared spectrum and is therefore an excellent choice for measurement of ferrous and non ferrous metals above 75°C because the emissivity of un-oxidized metalsurfaces is higher at shorter wavelengths. The parameters like Emissivity, Analog output, Sub-range, Response time and Peak picker can be preset ex-works or adjusted via software. This enables the instrument to be adapted for various measuring tasks. The pyrometer has solid
body in stainless steel housing which provides high operation safety even in rough industrial environment. Variety of working Distances with fixed focus available for different applications.


  • Induction Heating
  • Casting
  • Annealing
  • Welding
  • Forging
  • Sintering
  • Melting
  • Rolling mills
  • Hardening


Temperature Range 75°C….700°C
Spectral Range 2 μm to 2.6 μm
Photodetector Type Extended InGaAs
Distance to spot size ratio 50:1
Emissivity (e) 0.1….1.0 adjustable
Response Time 2 msec adjustable upto 10 sec
Accuracy Upto 400°C: 3°C
>400°C: 0.5% of measured value in °C + 1°C
Repeatability 0.1% of reading in °C + 1°C
Sighting Options
Laser Pilot Light (PL)
Analog Output 0-20mA, 4-20mA, 0-10V (User selectable)
Digital Output USB 2.0
RS-232/RS-485 (User selectable)
*At a time only one digital output possible
Operating Temperature 0°C…….70°C
0°C…..200°C (With water cooling jacket)
Power Requirement 24V DC ±1V, Ripple must be less than 50 mV
Weight & Dimensions 600g
Dia= Ø 49.5 mm; Length=118mm

Key Features

  • Wide temperature ranges from 75°C to 700°C.
  • Spectral range 2 μm...2.6 μm
  • Laser targeting
  • Fast response time within milliseconds
  • Analog output options available like 0...20mA, 4...20mA,0...10V
  • Digital USB2.0 output and RS-232/RS-485 Serial interface
  • User friendly PC software for communication


  • Pyrometer with Laser pilot light(PL)
  • Analog output 4...20mA,0..20mA, 0..10V
  • Digital USB 2.0 output with USB Cable
  • Digital Interface RS-232 & RS-485(user selectable)
  • 5 mtr long connection cable with connector
  • Calibration certificate, Software & Operation manual



Write Your Own Review
You're reviewing:Highly Accurate on-line Infrared non-contact Pyrometer