Tubular Furnace TF - 1800

Maximum Operating Temperature 1800°C

Internal Dimension (ID x OD x L) 50 x 60 x 1000mm 

High Alumina/Quartz ceramic tubes

Advance refractory interior, used in combination with energy efficient low thermal mass insulation.

Multi Zone temperature control for better uniformity.

Power control through Solid state relay or Thyristor unit provides low noise operation.

In stock
SKU
TF1800

Part Code: TF1800

$10,125.00

Details

Tubular furnaces are designed for sample testing under gas/vacuum atmosphere they are available in customize size and options with water cooled flange. Maximum design temperature of furnace is upto 1800°C.

The high-grade insulation materials guarantee low energy consumption and high heating rates due to their low thermal conductivity. Three-zone tube furnaces TF-3Z can achieve better temperature uniformity than single-zone versions. In these models each zone is equipped with a dedicated thermocouple and controller, which is especially useful to preheat gases required for reactions inside the system. The tube furnaces TF do not include an integral work tube. The work tube must be selected as an additional item. The work tube length is dependent on the application and will vary if used with or without modified atmosphere or vacuum.

Specifications

Maximum Temperature 1800°C
Heating Element Molybdenum Disilicide
Temperature Accuracy ±1°C
Temperature Controller Microprocessor based PID controller
External Chamber Construction MS Powder Coated / 304 Grade Stainless Steel (Optional)
Internal Chamber Construction Vacuum formed ultra high purity alumina low thermal mass insulation with pre sintered fiber insulation board for maximum
energy saving design
Tube Material High density alumina/ Quartz
Ceramic Tube ID X Hot zone length (mm)
50 X 200 & 80 X 250 or Customized tube size available on request
End Flange Flange made of SS at both end with gas/vacuum provision with ball valve. Leak proofing ensured with rubber/viton O ring
Controlling Thermocouple B

Key Features

  • Over-temperature limiter with adjustable cutout temperature for thermal protection class 2 in accordance with EN 60519-2 as temperature limiter to protect the furnace and load
  • Equipped with thermocouple break protection that help preventing thermocouple failure run away.
  • Water Cooled SS Flanges at both end with gas/vacuum provision with ball valve for Vacuum and Gas purging application. Leak proofing ensured with rubber/viton O ring

Accessories

  • Gloves
  • Heating Element
  • Tongs

Standards

  • ISO
  • CE

Reviews

Write Your Own Review
You're reviewing:Tubular Furnace TF - 1800